Polishing Drum
Polishing Drum to polish coated tablets. The drum is covered with interchangeable felt parts.
The cover has a 120 mm diameter opening for observation of the polishing process and addition of the polishing agent during the production process.
The polishing drum has 2 l volume with a working capacity of max. 40%.
The device is attached to the drive unit via the ERWEKA Universal Gear UG, which permits operation at various angles for optimal results.
Related products
-
All Purpose Equipment
High Speed Mixer
The Laboratory High Speed Mixer operates with the plough-share principle for mixing of powders, granules and other products of fibrous nature.
Different quantities can be mixed homogeneously in only a few minutes.
The mixing drum (5 liter volume, working capacity max. 70 %) offers a removable cover and can be rotated upside down for charging and emptying. A safety switch ensures that the drive unit AR 403 is switched off when the cover is removed.
All parts coming into contact with the product are made of stainless steel.
Technical details:
- Mixing drum 5 liter volume
- Working capacity max. 70%
SKU: n/a -
All Purpose Equipment
Double Roll Crusher
Double Roll Crusher with two driven rollers running in opposing directions from the inside to the outside.
The rollers are 70 mm long and made of stainless steel. They are equipped with teeth to produce a powerful grinding action by forcing the material against a series of braking combs. All parts coming into contact with the product are made of stainless steel. The maximum capacity of the double roll crusher is 20 kg / hour.
An emergency stop helps to prevent injuries.
SKU: n/a -
All Purpose Equipment
Pelletizer
The pelletizer GTE (300 mm diameter, 9.5 litre) is attached to the AR 403 via the Universal Gear UG which enables the operator to adjust the operating angle to the optimal position during operation.
The material can be fed in manually or continuously. The rotary movement of the pan carries the product to the top of the pan and then flows down the pan in an even stream to the base. By addition of the requisite amount of liquid, this process can be converted into the formation of pellets. The angle of the pan and the amount of liquid added determines the pellet size. When the pan is full, the pellets will continuously roll over the edge of the pan into a waiting container.
All parts coming into contact with the product are made of stainless steel.
SKU: n/a -
All Purpose Equipment
Conical Mill
The Conical Mill is designed for homogenization of dry products to a specified particle size, reduction of oversized particles to the desired size and milling of agglomerates back to the initial size. A set of shims to adjust the clearance between the rotor and screen (0.5 mm to 3.0 mm) is supplied. It allows a flow rate of up to max 40 kg / h with a rotor speed of 0 – 1200 rpm. A safety interlock helps to prevent injuries.
SKU: n/a
