HIGH THROUGHPUT & DEFINED FINAL FINENESS
This diagram shows a comparison of the Hammer Mill HM 200 with two rotor mills. The extremely high sample throughput of the HM 200 is clearly visible. The HM 200 shows a good crushing efficiency of 125, which is the value of the maximum feed size divided by the finest achievable grind size. The SR 300 and SK 300 accept a maximum feed size of 25 mm (unlike the HM 200 which accepts sizes up to 100 mm) and crush particles to a size below 0.05 mm or 0.1 mm respectively – resulting in a higher crushing ratio.
- Excellent crushing performance
- Very high throughput of up to 1500 kg/h
- Fixed speed of 3000 min-1
- Sieve range from 2 – 40 mm
- Feed size up to 100 mm, grind size < 0.8 mm
- Easy access to crushing chamber facilitates cleaning
- For batchwise or continuous grinding
- Connector for dust extraction
USER CONVENIENCE COMBINED WITH MAXIMUM SAFETY
Easy cleaning of the rotor and the hammers thanks to:
- Fold-back hopper to gain access to the crushing chamber from above
- Additional fold back option in the middle part of the machine allows easy cleaning of rotor and hammers from below
To ensure a long service life of the machine, even when mostly used for tough crushing tasks, the following parts can be exchanged by the user:
- Wear plates inside the mill
- Rotor with the swing hammers
A safety switch and the brake motor ensure that the unit comes to an immediate stop, e.g. if the door is opened unintendingly.
There are no reviews yet.