Conical Mill
The Conical Mill is designed for homogenization of dry products to a specified particle size, reduction of oversized particles to the desired size and milling of agglomerates back to the initial size. A set of shims to adjust the clearance between the rotor and screen (0.5 mm to 3.0 mm) is supplied. It allows a flow rate of up to max 40 kg / h with a rotor speed of 0 – 1200 rpm. A safety interlock helps to prevent injuries.
Related products
-
All Purpose Equipment
Wet Granulator
Wet Granulator with oscillating rotor for the production of wet granules.
The granules can be produced in varying sizes depending on the employed sieve mesh.
All parts coming into contact with the product are made of stainless steel. Working capacity is max. 30 kg / h depending on the material and mesh width of the sieve used. The unit is supplied as standard with two sieves 1.0 mm and 1.6 mm MW respectively. The following mesh sizes are also available: 0.315, 0.63, 0.8, 1.0, 1.25, 1.6, 2.0, 2.5 and 3.15 mm. Other special sieves are available on request.
An emergency stop helps to prevent injuries.
SKU: n/a -
All Purpose Equipment
Planetary Stirrer
The Planetary stirring unit for mixing of creams, ointments, pastes, moist powders and liquids.
This powerful mixing attachment comes with various mixing / stirring accessories e.g. kneading hook, mixing paddle, whisk and a fluoropolymer scraper for removing any product adhering to the side of the bowl, thus ensuring a homogenous mixing in the shortest possible time.
The stirring/mixing accessories and vessel (5 liter volume, working capacity 60 %) are made out of stainless steel. Optionally an electric heated bowl DER or a double jacket bowl DB for heating and cooling by water are available.
An emergency stop helps to prevent injuries.
Specifications
-
- Electric heated bowl
- Double jacket bowl for heating and cooling by water
SKU: n/a -
-
All Purpose Equipment
AR 403 Drive Unit
The ERWEKA All-Purpose system is based on a powerful drive unit available in two versions. The various attachments can be easily and quickly connected by means of a coupling.
The drive unit AR 403 is equipped with a three-phase AC motor. The sturdy ball bearing worm gear drive is completely maintenance free and provides an output torque of max. 23 Nm. The unit features electronic speed control, variable between 20 and 400 rpm. A digital dial regulates the speed.
Through permanent nominal/actual adjustment the preselected speed is kept, even under varying load. The AR 403-S is similar to the AR 403, but has a different drive train. This connection is designed for heavy use.
The drive unit AR 403 is equipped with a three-phase AC motor. The sturdy ball bearing worm gear drive is completely maintenance free and provides an output torque of max. 23 Nm. The unit features electronic speed control, variable between 20 and 400 rpm. A digital dial regulates the speed.
Through permanent nominal/actual adjustment the preselected speed is kept, even under varying load. The AR 403-S is similar to the AR 403, but has a different drive train. This connection is designed for heavy use.
SKU: n/a -
All Purpose Equipment
Polishing Drum
Polishing Drum to polish coated tablets. The drum is covered with interchangeable felt parts.
The cover has a 120 mm diameter opening for observation of the polishing process and addition of the polishing agent during the production process.
The polishing drum has 2 l volume with a working capacity of max. 40%.
The device is attached to the drive unit via the ERWEKA Universal Gear UG, which permits operation at various angles for optimal results.
SKU: n/a
